SWB Freedom-246

Time and date are set at the master station (#20) only and the information is shown on all of the Executive stations in the system. When setting or resetting of either Time and Date is required, always set both Time and Date. Set Time first, then Date.

NOTE: Neither # nor * keys are used in programming Time and Date.

A: To set Time:

1. Press the SET TIME key. The display will show  HH-MM (hour and minutes)
2. Press the Dial keys for the time you want. (4 digits must be entered)
3. Press the AM/PM key for PM setting only.

EXAMPLE: You want to set 2:05 PM

                      Press: 0205 and the AM/PM key.

                      The display will show: P 2-05

To start time press the SET TIME key again and the displays on all of the FS 900 Executive stations in the system will show the time operating.

B: To set Date:

NOTE: While you are programming the Date, on the display you will see the month, day, and year. Once programming is complete only the month and day will be diaplayed. Programming the year will automatically accurately adjust the months and days (including leap year).

1. Press the ALARM key. Your display will show:  MM-DD-YY (month, day, year)
2. Press the DIAL keys for the date you want (6 digits must be entered)

EXAMPLE: You want to set January 2, 1987.

Press 010287 for 01-02-87

To complete programming and start the Date running, press SET TIME key again.

NOTE: To see the date, Press DATE key. To go back to Time display, press the DATE key again or wait for a short time. Display will automatically return to Time.